ECS A785GM-M Manual page 60

56
SurroundView
multimonitor support for computers that use a PCI-Express based
graphics card in conjunction with ATI integrated graphic processors.
And there are two options: Disabled and PCI Express.
If SurroundView
OnBoard, SurroundView
based on cancel the Enable CrossFire
While if display by OnBoard, you must enter the BIOS, set the Init Display First in
Advanced Chipset Setup to OnBoard. Then press F10 to save the configuration and
exit the BIOS. After entering OS, enter Catalyst Control Center to enable CrossFire
3. Click with your right mouse button on My Computer, then click the option
Manage and choose the Device Manager, finally, click the Display Adapters. The
following screen appears. Be sure that the external ATI graphics (ATI Radeon HD
3400 Grapics) and Onboard graphics (Radeon HD 4200) are both displaying in the
Display adapters.
Hybrid Graphics
TM
provides the power and convenience of multiadapter,
TM
set to Disabled, and Init Display First set to
TM will be Enabled by Catalyst Control Center
TM
option.
Technology Support
®
TM
.