Integrated Peripherals - ECS A785GM-M Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Onboard IDE Controller
SATA Configuration
Onboard SATA Mode
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Onboard 1394 Function
USB Functions
Legacy USB Support
Onboard JMB362
: Move Enter : Select
F1:General Help
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
Onboard SATA Mode (Enabled)
Use this item to enable or disable the onboard SATA mode.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Onboard 1394 Function (Enabled)
Use this item to enable or disable the onboard 1394 function.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Onboard JMB362 (AHCI Mode)
Use this item to enable or disable the onboard JMB362 mode.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
Enabled
IDE
Enabled
DISABLED: disables the
Enabled
integrated IDE
Enabled
Controller.
Disabled
Enabled: enables both
Enabled
Controllers.
Enabled
Enabled
AHCI Mode
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
35
Help Item