E-Mu 404 Owner's Manual page 35

Tutorials
The MIDI Connection
6. Select the blue MIDI Input track by clicking on it. The MIDI Input connection
appears in the strip to the left of the MIDI tracks.
7. The E-MU 0404 USB 2.0 should already be selected as the MIDI input in
Omni mode as shown above. "MIDI Omni" allows Proteus VX VSTi to receive
on all 16 MIDI channels from your MIDI keyboard. (Proteus VX VSTi is
"multi-timbral" and can assign a different preset to each of the 16 MIDI
channels.)
8. Set the MIDI Channel for the track to
channel 1 as shown at right. This "re-
channelizes" the incoming MIDI data on any
MIDI channel to channel 1.
Open Proteus VX
9. Double-click on the number (or on the Proteus VX name) to open the Proteus
VX editor.
Double-Click Here
to Open Proteus VX
10. After a few seconds, the Proteus VX application window shown below appears.
0404 USB 2.0 Owner's Manual
Synth Rack with Proteus VX
MIDI Input Select
TIP . . .
Check the Sonar MIDI
Monitor in the SysTray to
verify that you're receiving
MIDI.
35