E-Mu 404 Owner's Manual page 17

Input/Output
Outputs
1 Main
L
R
4
4. Main Outputs
The main outputs are normally connected to your monitoring system. The
signal is duplicated on a stereo 1/8¨ jack for easy connection to desktop
stereo speakers.
Use TS unbalanced cables for consumer-level line signals and TRS balanced
cables for pro-level line signals. Balanced cables provide +6dB more output.
5. MIDI In/Out
The MIDI input and output ports allow you to interface any type of MIDI
equipment such as keyboards, effect units, drum controllers (anything with
MIDI).
6. On/Off Switch
This switch turns the 0404 USB 2.0 on or off. Don't cycle the power on and
off quickly or the internal computer may lock up. Wait a second or two
between power cycles.
7. USB
Connects the 0404 USB 2.0 to the USB 2.0 port on your computer via the
supplied USB cable and provides two-way, hi-speed communication. The
0404 USB 2.0 is NOT powered via USB and uses an external power adapter in
order to maintain the highest level of audio quality.
8. Power: 5 Volts DC
The 0404 USB 2.0 is powered from a +5VDC Adapter (supplied).
0404 USB 2.0 Owner's Manual
MIDI
In Out
Off
5
5 VDC
USB 2.0
Power
On
6 7
8
NOTE to PC Users:
When using a USB 1.1 port,
performance is limited to
16-bit and 44.1/48 kHz
recording and playback.
17