Audio Adjust - Denon S-5BD Owner's Manual

ENGLISH
Source Select
Auto Preset
Use the auto preset function to program radio stations.
Setting items
Start
If an FM station cannot be preset automatically, select the desired
Start the auto preset
station by tuning it in manually, then preset it manually.
process.
NOTE
FM
If "Auto Preset" is performed after performing "Manual Preset" (vpage
27), the "Manual Preset" settings will be overwritten.
Preset Name
Assign name to a preset memory.
Setting items
A1 – G8
1. Press
Select the preset channel.
2. Use
3. Use
FM AM
ENTER
• Up to eight characters can be input.
• The input character type can be switched by
pressing
being changed.
• The types of characters that can be input are as
shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH
GNumbersH 0123456789 (Space)
4. Repeat steps 2 and 3 to change the display name.
Default No
Reset all settings to factory Yes
default.

Remote control operation
buttons
Setting details
Setting details
ENTER
p or .
o p to set the cursor to the character you want to change.
ui to change the character, then press
.
SEARCH
while the display name is
! # % & ' ( ) * + , - . / : ; < = " > ? @ [ \ ]
Display the menu
Cancel the menu

Audio Adjust

The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently set
surround mode. For details on the adjustable parameters, see "Surround Modes and Audio Adjust"
(vpage 68).
Items that can be Set with the Audio Adjust Procedure
n
Surround Parameters vpage 48
Tone vpage 50
Audyssey Settings vpage 51
Audio Delay vpage 52
Surround Parameters
Rear
Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.
Setting items
DOLBY VS Mode REF : This is the standard Dolby Virtual Speaker mode.
Select the Dolby Virtual WIDE : This mode creates the sense of a wider sound.
Speaker mode.
Mode
n
Set the play modes for the
different surround modes.
n
n
•
•
Move the cursor
Confirm the setting
(Up/Down/Left/Right)
Default settings are underlined.
Setting details
In the PLgx or PLg Mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
In the PLgz Mode
Height : Dolby PLgz Height playback mode.
In the DTS NEO:6 Mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
When "Surround Parameters" – "Front Height" (vpage 49) is set to
"ON", the "Height" mode is set automatically.
The "Music" mode is also effective for movie sources including a lot of
stereo music.
Return to previous menu