Programming The Heating In 5/2 Day Mode - Danfoss FP715Si User Manual

1.7.1 Programming the heating in 5/2 day mode

1. Press PROG once until SET CH ON
TIME appears at the top of the
display and MOTUWETHFR appears
at the bottom of the display.
GB
Use the + or - buttons to set the
time you would like your heating to
fi rst come on in the morning (Event
1).
2. Press NEXT ON/OFF once only.
Use the + or - buttons to set the
time you want your heating to go
off (Event 2).
To move to the next setting, i.e.
when you would like your heating
to come on again (Event 3) press the
NEXT ON/OFF button again.
3. Continue programming the central
heating ON and OFF times for
weekday Events 4, 5 & 6 as in Step 2.
4. Press the DAY/HOL button once
and SASU will appear at the
bottom of the display.
10
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
FP715SI