LG 42LH250H Owner's Manual page 137

Installer Menu
011 - KEY DEFEAT (Keyboard Defeat)
If set to 1, key defeat prevents the end user from accessing the on-
screen menus with the display front panel--MENU, SELECT,and Left /
Right arrow keys do not function. If set to O, those keys do function.
NOTE: The menus can always be accessed by pressing MENU on the
remote.
015 - SLEEPTIMER
If set to 1, the SLEEP TIMERfeature may be used. If set to O, the
Sleep Timer is not available.
016 - EN TIMER (Enable On/Off Timers) *
If set to 1, Timer function is available to user and enabled continuous-
ly. Set to 0 to disable On/Off Timers. (Clock must be set in order to
use Timers.)
017 - ALARM *
Gives the installer the option of making the Alarm function available
to the end user. If set to 1, Alarm function is available to end user.
Set to 0 to disable the Alarm function.
NOTE: Clock must be set before the Alarm function will work.
021 - V-CHIP (Parental Control) *
Set to 1 to activate V-Chip (Parental Control); have it available to end
user to filter and control or otherwise restrict programming content
that can appear. Set to 0 to turn V-Chip feature Off, not available to
user; no programming restrictions can be set.
022 - MAX BLK HRS (Maximum Block Hours) *
Sets hours from 0 to 99 for the maximum V-Chip (Parental Control)
block hours. Default setting is for 12 blocking hours.
023 - CAPTION LOCK
Set to 1 to restore previous caption On/Off state after turn Off. If set
to O, captions are always Off at turn On.
028 - CH. OVERIDE(Channel Override)
If set to 1, the user can select channels with either Channel up/down
or by direct keypad entry. If set to O, only those channels that are
entered for scanning can be selected.
029 - OLD OCV (On Command Video _M)
Set to 1 for operation with systems from On Command Corporation.
030 - ACK MASK
M.P.I. Communication Parameter. Leave at default setting unless
changed by Pay-Per-Viewprovider. When set to 1, changes M.P.I. for
some OCVboxes.
* Only affects Function Menu if enabled by some PPV providers.
031 - POLL RATE
M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at
default setting unless changed by Pay-Per-View provider. Step size of
16 ms.
032 - TIMING PULSE
M.P.I. Communication Parameter. Leave at default setting unless
changed by Pay-Per-View provider. Sets baud rate. Step size of 4.3 uS.
034 - CAMPORTEN. (Camera Port Enable)
Set to 1 to enable Video 2 input on display panel. If set to O, Video 2
input on display panel is not functional.
NOTE:S-Video overrides Videojack.
035 - COMPPORT EN. (Computer Port Enable)
Enable/disables display panel HDMI1 input jack. Set to 0 to disable
HDMI 1. set to 1 to enable HDMI 1.
NOTE: The setting above is ignored if Installer item 093 RJP AVAIL-
ABLE, is set to 1.
038 - YPrPb EN. (Rear Component Video Enable)
Set to 1 to enable display panel rear Component Video input jacks.
Set to 0 to disable display panel rear Component Video input jacks.
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enable display panel rear AUX (Video 1) input.
Set to 0 to disable display panel rear AUX (Video 1) input.
Note: S-Video overrides Video.
040 - AUTO CAMPORT
Set to 1 to automatically switch to Camport when equipment is con-
nected to front Video input.
Set to 0 to disable front Video automatic source selection.
NOTE: If set to 1,093 RJP Available is automatically set to O.
046 - STRTAUX SRCE(Start Aux Source)
Sets the starting AUXsource. At power up, TVwill tune to starting Aux
source if item 004 Start Channel is set to O.
If item 093 RJP Available is set to 0 and item
040 Auto Camport is set to O:
1 = Video 1 4 = RGB 255 = Last Aux
2 = Video 2 5 = HDMI 2
3 = HDMI 1 6 = Component
If item 093 RJP Available is set at 1:
2 = Video 2 5 = HDMI 2 6 = Component
If item 040 Auto Camport is set to 1:
1 = Video 1 5 = HDMI 2
3 = HDMI 1 6 = Component
4 = RGB
206-4118 P A G E 2 9