LG 42LH250H Owner's Manual page 135

Installer Menu
Installer Menu Items 035 through 118
Menu item Function Value Range Default Value Brief Description of Function and Comments
035 COMPPORT EN. 0 / 1 1 Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1
038 YPrPb EN. 0 / 1 1 Set to 1 to enable display panel Component Video 1 input Jacks.
039 REARAUX EN 0 / 1 1 Set to 1 to enable display panel Video 1 input Jack,
040 AUTOCAMPORT 0 / 1 1 Set to 1 to automatically switch to Camport. If set to 1, STRTAUX SRCEcannot be set to 2.
046 STRTAUX SRCE 1 - 6, 255 6 Sets the starting AUX source.
047 AUX STATUS 0 / 1 0 Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel O.
053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time display.
069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-Time display.
071 BCK. CH-TIME 0 - 7 2 Choosescustom background color for the Channel-Time display.
073 CH NOTAVBLE 0 / 1 0 If set to 1 and channel override is O, "NOT AVAILABLE"message is displayed
when directly accessing a channel not in the favorite channel list.
075 REVERT CH 0 / 1 0 If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
078 UPN MSB 0 - 255 0 Llser programmable number, most significant byte.
079 UPN MSB-1 0 - 255 0 Llser programmable number, most significant byte - 1.
080 UPN MSB-2 0 - 255 0 Llser programmable number, most significant byte - 2.
081 UPN LSB 0 - 255 0 User programmable number, least significant byte.
082 CHKSMERROR 0 / 1 1 Enforces rigid M.P.I. checksum.
083 HANDSHKTIME 0 - 5 5 Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
084 PERMANENT BLK 0 / 1 0 Removes block hours setting for Parental Control and makes block permanent,
087 REARROB EN. 0 / 2 / 18 2 Set to 0 to disable ROB1. Set to 2 to enable for PC and Auto Configure always enabled, Set to 18 to
enable for PC and Auto Configure one time only after AC ON.
088 EN NOISEMUTE 0 / 1 1 If set to 1, mutes audio if no signal is present.
090 KEYLOCK 0 / 1 0 If set to 1, keyboard is locked out, IR is still functional.
091 YPrPB2 EN 0 / 1 1 Set to 1 to enable HDMI-2 input,
093 RJP AVAILABLE 0 1 2 5 6 0 Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See detailed descriptions.)
094 SAP MENUEN 0 / 1 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096 DEF.ASP. RATIO 0 -- 4 2 Sets default aspect ratio at power up. See detailed descriptions and item 106.
098 START GEMCH 0 - 135, 255 255 Sets the stating Gem channel, 255 last channel at power Off.
099 BACKLIGHTING 1 - 100 200 Sets the brilliance of the TV picture backlighting.
101 - 200, 255 Settings above 101 control dynamic back lighting and disable power saving mode..
102 ATSCBAND 0 - 4 4 Selects ATSCband.
103 ATSCTUNE MODE 0 / 1 1 Default 01 for physical channel scan, Set to 0 for Virtual Channel scan,
104 START MINOR CH 0 - 255 0 Selects Minor start channel. Set 0 for NTSC. Not O, sets Minor channel number.
106 ASP RATIO LOCK 0 / 1 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
116 VIDEO MUTE EN 0 / 1 0 Set to 0 for normal, set to 1 for Blank.
117 FACTDEFAULT 0 / 1 0 0 Normal. 1 Loads presets of all above settings.
118 POWER SAVING 1, 3, 7 3 Set to 1 to be powered at b-Lan module. Set to 3 to bo powered at b-Lan module only when TV is powered
on. Set to 7 to be not powered at b-Lan module.
Note 1: Dependent on item 093 RJP Available setting.
206-4118 P A G E 2 7