Table of Contents
Advertisement
Set up SOS calling and messaging
You can specify six recipients for SOS calls and one recipient for
an SOS message.
When you send out an SOS for help by pressing
the back of your phone, the following occurs:
•
The phone sounds a warning tone and the SOS light
flashes.
•
The phone sends your specified SOS text message to
your specified SOS message recipient.
•
Next, the phone calls each of your specified SOS call
recipients, one-by-one.
If a recipient answers the call, the tone and light stop and you can
speak. When you hang up, the tone, light and dialing resume until
you disable them.
If a recipient does not answer the call, the phone repeats the
dialing circuit two more times. If a call comes in during an SOS,
the phone automatically answers the call and stops the tone and
light so that you can speak. The tone and light continue until you
disable them.
To stop the SOS tone, light and dialing, hold down
then press
Specify recipients of your SOS calls
You can specify six recipients of SOS calls. Before you begin,
ensure that all of your recipients are listed in your cell phone
phonebook.
1. Press
2. Press
3. Press
4. Press
select OK.
5. Press
6. Press
select OK.
7. Repeat Steps 4 and 5 until all of your recipients are specified.
Done! appears on the display.
to select OK.
to select Menu.
to highlight SOS Setting, and then select OK.
to select Set SOS Number.
to select one of six help numbers, and then
to select OK.
to scroll to a number in your phonebook, and then
27 – ENGLISH
on
, and
Advertisement
Table of Contents
