Setting Toll Saver (Msg Ctr Mode) - Brother MFC-640CW User Manual

Setting Toll Saver (Msg Ctr mode)

When you set the toll saver feature, the machine answers after four
rings if you do not have voice or fax messages and after two rings if
you do have voice or fax messages. This way, when you call the
machine for remote retrieval and let it ring three times, you know you
have no messages and can hang up to avoid a toll charge.
■
When Toll Saver is On, it overrides your Ring Delay setting.
(See Setting the Ring Delay on page 4-3.)
■
The Toll Saver feature is available only when the Message
Center is set to On.
■
If you are using Distinctive Ring, do NOT use the Toll Saver
feature.
1
If it is not illuminated in green, press
2
Menu/Set
Press
3
Press or
▲
Menu/Set
Press
4
Press or
▲
Menu/Set
Press
5
Stop/Exit
Press
4 - 4 SETUP RECEIVE
2 1 1
, , , .
to select Toll Saver.
▼
.
to select On (or Off).
▼
.
.
Fax
( ).
Ring Delay
Toll Saver