Radio Reception; Scan Tuning; Manual Tuning - Blaupunkt MONTREAL CD34 Manual

Radio Reception

Seek Tuning
1.
BND
Press the to select the desired AM or FM band.
FM 1 ➜ FM 2 ➜ FM 3 ➜ AM 1 ➜ AM 2
(FM 3 & AM 2 are Travel Store bands.)
2.
Press the or to tune in stations. Tuning au-
tomatically stops at a broadcasting frequency.
When tuned in to FM stereo broadcasting stations, the
" ST " will appear on the display window.
: .
Lower Frequency
: Higher Frequency .

Manual Tuning

1.
Press the BND to select the desired AM or FM band.
2.
Press and hold the or
ond to activate the manual tuning mode.
R-ch/L-ch Level Meter will light on the display window.
Press again to tune in to stations.
After 4 seconds of completing Manual Tuning, the tuning
control will revert to the Seek Tuning mode.
E-6

Scan Tuning

1.
Press the
2.
Hold the
The unit will scan the selected band for stations and the
unit will stop at each station for 10 seconds, before con-
tinuing to the next station.
Press the
remain this on the selected frequency.
Preset Scan Tuning
1.
Press the
2.
Hold the
onds. The unit will scan preset memory for the 12 sta-
tions from the AM 1/AM 2 band or the 18 stations from
for more than 0.5 sec-
the FM 1/FM 2/FM 3 bands. The unit will stop at each
preset station for 10 seconds, before continuing to the
next preset station.
Press the
ing and remain this on the selected frequency.
Memorizing Stations Automatically (Travel Store)
1.
Press the
2.
Hold the
Up to 6 stations will be automatically stored in preset
memory for the selected band.
If the radio is in FM 1 or FM 2, it switches to FM 3. If the
radio is in AM 1, it switches to AM 2.
Note
This function is available for FM 3 and AM 2.
BND to select the desired AM or FM band.
or pressed for less than 2 seconds.
or again to stop Scan Tuning and
BND to select the desired AM or FM band.
or pressed for more than 2 sec-
or again to stop Preset Scan Tun-
BND to select the desired AM or FM band.
BND pressed for longer than 2 seconds.
Memorizing Only the Desired Stations
You can store up to 6 stations on each band (18 for FM 1, FM
2 and FM 3, 12 for AM 1 and AM 2) in the order of your choice.
1.
BND
Press the to select the desired band.
2.
Press the or to tune in stations.
3.
Press and hold the desired preset memory button
6 for about 2 seconds until the frequency indicator
flashes twice.
The number of the pressed preset memory button ap-
pears on the display window.
Note
If when you store another station on the same preset number
button, the previously stored station is replaced with new one.
Receiving the Memorized Stations
1.
BND
Press the to select the desired AM or FM band.
2.
Press the 1 - 6 momentarily.
1
-