Cancel Demonstration; Set Clock/Initial Settings; Getting Started - Kenwood KDC-255U Instruction Manual

Instruction manual
Hide thumbs Also See for KDC-255U:
Table of Contents

Advertisement

GETTING STARTED

1
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: "CANCEL DEMO" \ "PRESS" \ "VOLUME KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
KMR - 355U
For
, [DEMO OFF] is selected initially.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to select [CLOCK], then press the knob.
4
Press the volume knob to select [CLOCK ADJUST]/ [CLOCK ADJ].
5
Turn the volume knob to adjust the hour, then press the knob.
6
Turn the volume knob to adjust the minute, then press the knob.
Press 4 / ¢ to move between the hour and minute adjustment.
7
Press and hold
to exit.
(or)
Press and hold
directly while in clock display screen.
Then, perform steps
4
EN_KDC-X397[KWK0]f.indd 4
to enter clock adjustment mode
5
6
and
above to set the clock.
3
Set the initial settings
1
Press
to enter [STANDBY].
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select [INITIAL SET], then press the knob.
4
Turn the volume knob to make a selection (see the table below), then press
the knob.
5
Press and hold
to exit.
• To return to the previous hierarchy, press
PRESET TYPE
NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ AM). ; MIX: Memorizes one station or SiriusXM channel for each preset
button regardless of the selected band or SiriusXM channel.
KEY BEEP
ON: Activates the keypress tone. ; OFF: Deactivates.
KDC - MP255U
PANDORA SRC
(Except for
ON: Enables PANDORA in source selection. ; OFF: Disables. (
BUILT-IN AUX/
ON: Enables AUX in source selection. ; OFF: Disables. (
BUILTIN AUX
CD READ
1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play
as a music CD. No sound can be heard if an audio file disc is played.
KDC - X397
SWITCH PRE
(Except for
REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the
line out terminals on the rear (through an external amplifier).
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
F/W UP xx.xx
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
.
KDC - MP155U
/
)
8)
7)
KDC - 355U
/
)
Default: XX
7/26/12 10:55:35 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents