Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual page 68

Command
ESC 2
[Name] Select default line spacing.
[Format] ASCII
Hex
Decimal
[Description] Selects 1/6-inch line (approximately 4.32mm) spacing.
ESC 3 n
[Name] Set line spacing
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤255
[Description] Sets the line spacing to [n X vertical or horizontal motion unit] inches.
ESC = n
[Name] Select peripheral device.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤n ≤3
[Description] Selects device to which host computer sends data, using n as follows :
Bit Off/On
0 Off
On
1-7 -
ESC ? n
[Name] Cancel user-defined characters.
[Format] ASCII
Hex
Decimal
[Range] 32 ≤n ≤126
[Description] Cancels user-defined characters.
ESC @
[Name] Initialize printer.
[Format] ASCII
Hex
Decimal
[Range] 32 ≤n ≤126
[Description] Clears the data in the print buffer and resets the printer mode to the mode that was in effect when the
power was turned on.
ESC D n1... nk NUL
[Name] Set horizontal tab positions.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤n ≤255
0 ≤k ≤32
[Description] Sets horizontal tab positions.
* n specifies the column number for setting a horizontal tab position from the beginning
of the line.
* k indicates the total number of horizontal tab positions to be set.
Samsung Electro-Mechanics
ESC 2
1B 32
27 50
ESC 3 n
1B 33 n
27 51 n
ESC = n
1B 3D n
27 61 n
Hex Decimal
00 0
01 1
- -
ESC ? n
1B 3F n
27 63 n
ESC @
1B 40
27 64
ESC D n1... nk NUL
1B 44 n1... nk
27 68 n1... nk
Function
Printer Disabled.
Printer Disabled.
Undefined.
00
0
8-5