Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual page 65

Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
On 04
3 Off 00
On 08
4 On 10
5-6 - -
7 Off 00
Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
On 04
3 Off 00
On 08
4 On 10
5 Off 00
On 20
6 Off 00
On 40
7 Off 00
Bit 5 : Becomes on when the paper end sensor detects paper end and printing stops.
Bit Off/On Hex
0 Off 00
1 On 02
2 - -
3 Off 00
On 08
4 On 10
5 Off 00
On 20
6 Off 00
On 40
7 Off 00
Bit 3 : If these errors occur due to paper jams or the like, it is possible to recover by correcting the cause of the
error and executing DLE ENQ n (1 ≤n ≤2).
Bit 6 : When printing is stopped due to high print head temperature until the print head temperature drops
sufficiently or when the paper roll cover is open during printing, bit 6 is on.
Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
3 On 0C
4 On 10
5 Off 00
6 On 60
7 Off 00
8-2
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
0 Drawer open/close signal is LOW (connector pin 3).
4 Drawer open/close signal is HIGH (connector pin 3).
0 On-Line
8 Off-Line
16 Not used. Fixed to On.
- Undefined.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
0 Cover is closed.
4 Cover is open.
0 Paper is not being fed by using the PAPER FEED button.
8 Paper is being fed by the PAPER FEED button.
16 Not used. Fixed to On.
0 No paper-end stop.
32 Printing stops due to paper end.
00 No error.
64 Error occurs.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
- Undefined.
0 No auto-cutter error.
8 Auto-cutter error occurs.
16 Not used. Fixed to On.
0 No unrecoverable error.
32 Unrecoverable error occurs.
0 No auto-recoverable error.
64 Auto recoverable error occurs.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
Paper roll Near-END sensor : Paper adequate.
0
12 Paper near-end is detected by the paper roll Near-END sensor.
16 Not used. Fixed to On.
0 Paper roll-end sensor : Paper present.
96 Paper roll end detected by paper roll-end sensor.
0 Not used. Fixed to Off.
n = 1 : Printer status
n = 2 : Off-line status
n = 3 : Error status
n = 4 : Continuous paper sensor status
Samsung Electro-Mechanics
Command