Frame Block - Samsung SRP-350PG - SRP 350 B/W Direct Thermal Printer Service Manual

4 Disassembly and Assembly

4-3 Frame Block

Brkt Cover
3
Cutter
Figure 4-10 Disassembly Frame #1
2
Screw
1
Figure 4-11 Disassembly Frame #2
4-6
Knob Cutter
1
Screw (3x10)
2
Auto Cutter
4
Frame Main
5
Heatsink Assy
1. Pull out the Knob-Cutter 1 and separate it.
2. Remove the two screws 2 .
3. Separate the BRKT Cover-Cutter 3 and the
Auto-Cutter 4 from the Frame Main 5 .
1. Remove the screws 1 .
2. Push the Heat-Sink Assembly 2
direction of an arrow and separate it.
Samsung Electro-Mechanics
in the