Ricoh Pro 907EX Quick Start Manual page 9

Booklet Printing – Large & Small
Open the document
Press File >print
Select the Ricoh Print Driver (PCL5e/PCL6)
Press Properties
At Page Set up Tab
Select Duplex>booklet
Select Staple>2 at center
Across from Duplex option select non reduction booklet>say ok to the message
At Paper Setup Tab
Select the tray that has the 11x17 paper
Press OK, Ok, Ok, to print
Place the 8 1/2x11 paper in one of the internal trays (copier cannot staple a booklet document in portrait mode)
Open the document
Press File >print
Select the Ricoh Print Driver (PCL5e/PCL6)
Press Properties
At Page Set up Tab
Select Duplex>booklet
Select Staple>2 at center
At Paper Setup Tab
Select the tray that has the 8 1/2x11 paper to print the document.
Press OK, Ok, Ok, to print