Konica Minolta magicolor 1650EN User Manual page 180

1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Remove the dust cover from
Tray 1.
Close Tray 1 and the output tray.
3
Prepare the attachment.
Be sure to place the attachment on a level surface.
4
Lift the printer and place it on top
the attachment, making sure that
the positioning pins on the
attachment correctly fit into the
holes on the bottom of the
printer.
5
Open Tray 1 and reattach the dust cover.
Next, install the duplex option.
Duplex Option 9-7