Advertisement
INSTALLATION INSTRUCTIONS
Fig. 12
Fig. 14
Fig. 16
The standpipe must have an internal diameter of at least 40mm
to allow an air gap between the drain hose and the standpipe.
It is a mandatory requirement that the standpipe is installed in
such a way that the end of the drain hose cannot be covered
with water.
NOTE: Whether discharging into a standpipe or into a sink, the
height of the discharge hose above floor level must be between
60 and 100cm (see Fig. 17).
Fig. 13
Fig. 15
Fig. 17
15
Advertisement
