Axminster MB1933 User Manual
Axminster MB1933 User Manual

Axminster MB1933 User Manual

Bench top thicknesser

Advertisement

MB1933 Bench Top
Thicknesser
Axminster Reference No: MB1933
w w w. a x m i n s t e r. c o . u k
W
A X M I N S T E R
W H I T E

Advertisement

Table of Contents
loading

Summary of Contents for Axminster MB1933

  • Page 1 MB1933 Bench Top Thicknesser A X M I N S T E R W H I T E Axminster Reference No: MB1933 w w w. a x m i n s t e r. c o . u k...
  • Page 3 Page No. Index of Contents........................03 General Safety Instructions…..……..…………............04-05 Specfic Safety Instructions..……..…………............... 06-07 Safety Symbols used Throughout this Manal............08 Technical Specification..................... 09 Accessories.………..……..…………................10 Getting To Know Your Thicknesser.……..………….............11-12 Electrical Connections....................13 Assembly Instructions..................14-15-16-17 Operating Instructions................18-19-20-21-22 Care and Maintenance................. 23-24-25-26 Stand Assembly......................27 Positioning Thicknesser onto the Stand..............28 Troubleshooting………..……..…………...............
  • Page 15 Flat section Refitting the M6 x 20mm Refitting the rubber bung cross head screw...
  • Page 19 On “I” Off “O”...
  • Page 20 Overload switch...
  • Page 21 For normal thicknessing operations press the button first, and then press the button. Press button to select imperial or metric readings. These two buttons can be effected regardless of moving the height adjustment wheel, then you can start thicknessing. The reading on the display can be amended at any time by the following: Press and hold the button until the word...
  • Page 22 This button enables the reading to be ‘split’ and totalised. Example below in Press the button, the word appears on the display. ABS works equally in imperial.
  • Page 23 Blade pressure Blade plate Blade Cutterblock retaining bolt Cutterblock lock...
  • Page 26 Cover retaining screws...
  • Page 27 Fig 2 Fig 1...
  • Page 28 Bolt the machine to the stand using four M8x55mm hex head bolts, by pushing the bolt/washer through the chassis, through the stand and securing with washer, spring washer and M8 nut to lock the thicknesser and stand in place. Fig 3...
  • Page 36 Axminster Reference No: MB1933 Axminster Devon EX13 5PH UK FREEPHONE 0800 371822 A X M I N S T E R W H I T E www.axminster.co.uk...

Table of Contents