Starting The Cst; Cst Checklist Screens - Compaq 230038-001 - StorageWorks NAS Executor E7000 Model 902 Server Quick Start Manual

Cluster Setup Tool
The following is required before using the CST:
•
Server names
•
Domain name for the cluster
•
Cluster name
•
Static IP Address for cluster use
•
Domain account with administrative privileges for the cluster service (account
must have the "logon as a service" privilege)
•
A LUN formed as a Mirrorset on the SAN for the Quorum Disk
•
Create at least two LUNs formed as RAID 3/5 RAIDsets on the SAN
•
Static IP addresses and network names for virtual servers

Starting the CST

Open Internet Explorer on a Windows-based PC that has network access to the NAS
device. Enter
followed by
NAS device.
Example:
http://node1:3201

CST Checklist Screens

All information from the CST Prerequisites section must be gathered prior to using
the CST. The CST transitions between both nodes in a cluster in order to set up the
nodes simultaneously.
IMPORTANT: While using the CST, you must check all of the check boxes to proceed to the
next screen.
4-2
and the host name of one of the NAS devices for the cluster
http://
. Press Enter. This launches the CST on the target StorageWorks
:3201
.
Compaq StorageWorks NAS Executor E7000 Quick Start Guide