Webui Initialization (Recommended Method); Auto Discovery Method (Via Rapidlaunch); Requirements - Compaq 230038-001 - StorageWorks NAS Executor E7000 Model 902 Server Quick Start Manual

Hide thumbs Also See for 230038-001 - StorageWorks NAS Executor E7000 Model 902 Server:

Table of Contents

Configuration Setup

WebUI Initialization (Recommended Method)

The NAS E7000 includes a WebUI application that is designed to be a graphical,

easy-to-use application that gathers the necessary information for initialization. The

WebUI may be accessed through two methods: by host name or through auto

discovery mode using the RapidLaunch utility.

The NAS E7000 includes a RapidLaunch CD that can run on any Windows-based PC

using Microsoft Internet Explorer 5.5 (or greater). The WebUI application is

designed to be graphical and easy-to-use, and to assist you in populating information

necessary for initialization.

NOTE: RapidLaunch must be run on each node in a cluster.

The following items are required to run the WebUI configuration application:

•

Windows-based PC loaded with Microsoft Internet Explorer 5.5 (or greater) on

the same segment as the NAS E7000

•

RapidLaunch CD

NOTE: The NAS E7000 is designed to be deployed without a monitor, keyboard, and mouse.

These ports are available and supported by the NAS device if used.

3-2

Compaq StorageWorks NAS Executor E7000 Quick Start Guide

Table of Contents