Brother FAX-8650P - B/W Laser - Fax Service Manual page 166

Trouble
(3) Light
(4) Dark
At the scanner
Check the following components:
- CIS unit
- Main PCB
At the printer side
Replace the toner cartridge with a new one and print 4 to 5
l
pages. If the problem persists, proceed to the next step.
Remove the toner cartridge and start printing. If printing
l
takes place, clean the toner sensor or replace the toner
sensor PCB.
Clean the high-voltage contacts for the transfer roller on the
l
drum unit, main cover, and high-voltage power supply PCB.
(Contacts ƒ in the illustration given on page VI-23)
Clean the high-voltage contacts for the developer roller on
l
the drum unit, main cover, and high-voltage power supply
PCB. (Contacts ‡ in the illustration given on page VI-23)
Clean the grounding contacts on the drum unit, gear drive
l
unit, and main cover. (Contacts • and ‚ in the illustration
given on page VI-23)
Check the connection of the main–high-voltage flat cable.
l
Replace the drum unit.
l
Replace the high-voltage power supply PCB.
l
Replace the main PCB.
l
At the scanner
Check the following components:
- CIS unit
- Main PCB
At the printer side
Slide the wire cleaner tab to clean the corona wire inside the
l
drum unit.
Clean the high-voltage contacts for the grid and corona wire
l
on the drum unit, main cover, and high-voltage power supply
PCB. (Contacts ... and † in the illustration given on page
VI-23)
Replace the drum unit.
l
VI - 19
Action to be taken