Brother FAX-8650P - B/W Laser - Fax Service Manual page 151

[ 2 ] Error codes shown in the "MACHINE ERROR X X " message
Error Code
X X
(Hex.)
( 71
( 72
( 73
( 74
( 75
( 76
( 77
( 78
( 79
( 80
( 82
( 83
( 84
( 88
( A1
( A2
( A3
( A4
( A7
( A8
( A9
( AC
Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are
displayed as messages described in "[ 1 ] Error messages on the LCD." Those error codes appear in
the communications error list if an equipment error occurs during communications. Refer to Section
1.2, (13).
Laser scanner motor does not lock. )
Cannot detect Beam Detect signal. )
No toner cartridge loaded. )
Toner empty. )
In-house temperature error. )
Fixing heater harness disconnected or broken. )
Heater thermister short circuit.)
Heater thermister harness disconnected or broken. )
Toner thermister disconnected or broken. )
Paper size setting error. )
Paper feeding error. )
Paper jam. The registration sensor remains ON.)
Paper jam. The paper ejection sensor remains ON. )
Paper jam. Even after the registration sensor has gone OFF, the paper
ejection sensor still stays OFF.)
Top cover opened. )
Document too long to scan. )
Document not detected by the document rear sensor. )
50% or more faulty of white level data. )
One-line feeding time-out error. )
One-line scanning time-out error. )
Abnormal scanning reference voltage. )
Less than 50% faulty of white level data. )
Error factor
VI - 4