AT&T IPC-1600 User Manual page 165

Index
Performance Characteristics, 6-3
Ports and Drivers, 1-6
Power Consumption, 6-5
Preparation,
Prepare Machine for Installation, 4-2
Prepare the IPC-1600 for Installation, 4-3
Prepare the IPC-1600 for Installation,
Set the Controller Memory Starting Address, 4-3
Set the Input/Output Port Address, 4-3
Set the Interrupt Request Level, 4-3
Removing the MS-DOS Device Driver and Diagnostics, 2-16
RF Interference Warning, P-3
RJ-45 Type Modular Jack Connector, B-9
Serial Input/Output Device Interface,
10-Conductor Modular Cables, B-19
16-Ports Fanout Module Assembly, B-7
Adapter and Cable Ordering Information, B-26
Adapter Use Information, B-27
AT&T 10-Pin Extender Adapter, B-21
Compatibility with Other I/O System Cabling, B-22
Data Circuit-Terminating Equipment (DCE) Connections, B-16
Data Terminal Equipment (DTE) Connections, B-10
IPC-1600 80-Pin Headers P3 and P4, B-3
RJ-45 Type Modular Jack Connector, B-9
Serial Port Characteristics, B-1
Voltage Envelope, B-2
Serial Port Characteristics, B-1
space condition, B-2
Switch Settings,
IN-6 IPC-1600 USER'S GUIDE
P
R
S