Table of Contents
Advertisement
Appendix
Troubleshooting
•
If the previous suggestions do not work, disconnect the
telephone base from the telephone jack and connect another
phone to that jack. If there is no dial tone on that phone
either, the problem is in your wiring or local service. Contact
your telephone service provider.
The battery does not charge.
•
Make sure that the battery is securely installed in the
cordless headset.
•
If the cordless headset is in its headset charger but the
on the headset does not turn on, refer to The
headset is off while charging on page 24.
•
Charge the battery in the cordless headset for at least three
hours. For optimum daily performance, return the cordless
headset to the headset charger when not in use.
You may need a new battery. Refer to the Battery installation
•
section on page 6.
•
Your headset might be defective. Refer to the Limited warranty
section on pages 34-37 for further instructions.
I cannot dial out.
•
Try all the suggestions above.
•
You must use a telephone on the same line to dial out. Once
you have dialed the number, you can press
•
If other phones in your home or office are having the same
problem, the problem is in your wiring or local service. Contact
your telephone service provider (charges may apply).
My cordless headset isn't performing normally.
•
Make sure the power cord is securely plugged into the headset
charger. Plug the unit into a different working electrical outlet
not controlled by a wall switch.
20
light
light on the
to join the call.
Advertisement
Table of Contents
