Display Test - Actron CP9180 Manual

Using The Scan Tool
4.Return to Setup Tool Menu.
•Use the
OR
•Use the

Display Test

The Display Test is used to check the display.
✓
The test fills every pixel of the display with a solid black character.
3
From System Setup menu:
1.Select Display Test.
•Use
key until Display Test is
highlighted.
2. Start Display Test.
•Press
3. Look for Missing Spots.
• All characters display in solid black if
there are no concerns.
• Screen flips back and forth between
screens shown below.
3 – 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
BACK key.
ENTER Key.
UP or DOWN arrow
ENTER.
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode