View Tool Information - Actron CP9180 Manual

Using The Scan Tool
3.Save Contrast Setting.
•Press
✓
ENTER
Press
theSystem Setup menu.

View Tool Information

✓
This function allows you to view specific tool information that may
be needed when contacting customer service.
From System Setup menu:
1.Select Tool Information.
UP or
•Use
key until Tool Information is
highlighted.
•Press
2.View Information:
❒
S/N (Serial No:)
❒
Software ID (SW ID:)
3.Write Down Scan Tool
Information.
• Space is provided on inside
front cover to record the Scan
Tool information.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 7
ENTER.
again to return to
DOWN arrow
ENTER.
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
Tool Information
=====================
S/N: 1234567
SWID: A7B1
Press BACK to Exit
3