Chapter 2 Installation; Hardware Installation; Software Installation - TP-Link TL-WN8200ND User Manual

Chapter 2 Installation

2.1 Hardware Installation

1. Connect one end of the USB cable to the Adapter.
2. Connect the other end of the USB cable to the USB port on your computer. Because the
Adapter gets its power from the host, there is no external power supply. The LED should light
up when the Adapter is plugged in and the PC is on.
Note:
The Found New Hardware Wizard screen will pop up when the adapter is installed correctly.
Click Cancel.

2.2 Software Installation

The adapter's Setup Wizard will guide you through the installation procedures for Windows 7,
Windows Vista, and Windows XP. The procedures in different systems are quite similar,
therefore here takes the procedures in Windows 7 for example.
1. Insert the Resource CD into your CD-ROM drive, and the window below will appear. Select
model TL-WN8200ND. There will be a menu including: Install Driver&Utility and User
Guide. Click Install Driver&Utility to begin.
TL-WN8200ND 300Mbps High Power Wireless USB Adapter
4