Table of Contents
Advertisement
VideoJet X10
5.41
Advanced Mode: JPEG Posting
You can save individual JPEG images on an FTP server at specific intervals. You can then
retrieve these images at a later date to reconstruct alarm events if required.
Image size
Select the resolution you wish the JPEG images to have:
–
–
–
File name
You can select how file names will be created for the individual images that are transmitted.
–
–
–
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if
you do not want any images to be sent.
FTP server IP address
Enter the IP address of the FTP server on which you wish to save the JPEG images.
FTP server login
Enter your login name for the FTP server.
FTP server password
Enter the password that gives you access to the FTP server.
Bosch Security Systems
Small
176 × 144/120 pixels (QCIF)
Medium
352 × 288/240 pixels (CIF)
Large
704 × 576/480 pixels (4CIF)
Overwrite
The same file name is always used and any existing file will be overwritten with the
current file.
Increment
A number from 000 to 255 is added to the file name and automatically incremented by 1.
When it reaches 255 it starts again from 000.
Date/time suffix
The date and time are automatically added to the file name. When setting this parameter,
ensure that the unit's date and time are always correctly set. Example: the file
snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and 30 seconds.
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
83
Advertisement
Table of Contents
