Bosch VJT-X10S Installation And Operating Manual page 92

92 en | Operation
View Control
Control options for peripherals (for example a pan/tilt head or dome camera) depend on the
type of unit installed and on the configuration of the VideoJet X10.
If a controllable unit is configured and connected to the VideoJet X10, the controls for the
peripheral are displayed next to the video image.
1.
2.
Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details (see
Section 5.15 Advanced Mode: LIVEPAGE Functions, page 43).
Triggering Relay
You can switch connected units using the relays in the VideoJet X10 (for example lights or
door openers).
DOC | V4.0 | 2009.06
To control a peripheral, click the appropriate controls.
Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.
Installation and Operating Manual
VideoJet X10
Bosch Security Systems