Table of Contents
Advertisement
VideoJet X10
5.15
Advanced Mode: LIVEPAGE Functions
On this page you can adapt the LIVEPAGE functions to your requirements. You can choose
from a variety of different options for displaying information and controls.
1.
2.
Transmit audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps for each connection.
Bilinx control
Next to the field for view control at the top left of the LIVEPAGE, an additional field is
displayed for the special Bosch Security Systems Bilinx control.
Lease time (s)
The lease time in seconds determines the time beyond which a different user is authorized to
control the camera after no further control signals are received from the current user. After
this time interval, the camera is automatically enabled.
Show alarm inputs
Alarm inputs are shown next to the video image as icons, along with their assigned names. If
an alarm is active, the corresponding icon changes color.
Show relay outputs
Relay outputs are shown next to the video image as icons, along with their assigned names. If
the relay is switched, the icon changes color.
Bosch Security Systems
Check the box for the items that are to be made available on the LIVEPAGE. The selected
items are indicated by a check mark.
Check whether the required functions are available on the LIVEPAGE.
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
43
Advertisement
Table of Contents
