Display Mode & Timing Parameters - Nvidia FX1300 - Quadro FX 128MB Dual DVI-I PCIe Video Card User Manual

Figure 7.26
Display Mode & Timing Parameters
Click the Mode & timing list if you want to select a "custom" timing value or an
"EIA‐861B" timing. These settings are explained below.
Note: If you rather use "standard" timings (such as DMT, GTF, CVT, and EDID), see
"Display Timing Standards" on page
• Custom values — If you are an advanced user and would prefer to enter custom
timing values in the fields provided on the Advanced Timing page, follow these
steps:
Select Custom values from the Mode & timing list and click Apply.
1
Enter the values you want in the various fields as described in Table 7.1
2
When the confirmation prompt appears, click Yes. Your custom settings are
3
now in effect.
NVIDIA Corporation
Advanced Timing — Custom Modes/Timings & Timing Standards
Configuring Key ForceWare Graphics Driver Features
147 in the next section.
Chapter 7
144