To enable these custom resolutions, see the next section "Enabling Custom Screen
6
Resolutions" on page
Enabling Custom Screen Resolutions
After you have added one or more custom screen resolutions, follow these steps to
enable these resolutions.
1 Select the Only show custom modes check box to access those screen resolutions
& refresh rates that you have added using the Add button.
Note: Custom resolutions that you can select are limited to resolutions divisible by
2 Click Apply.
3 Move the Screen resolution slider to a custom resolution you added.
4 Click Apply.
The screen may go blank for a few seconds for the new setting to take effect.
Removing Custom Screen Resolutions & Refresh Rates
1 Once you have added one or more custom screen resolutions and refresh rates,
follow the remaining steps to delete any of them:
2 From the Screen Resolution & Refresh Rates page, make sure the Only show
custom modes check box is selected.
3 Move the Screen resolution slider to a custom resolution that you want to delete.
4 Click the Remove button to delete that resolution.
5 Repeat steps 3 and 4 for additional resolutions you want to remove.
NVIDIA Corporation
142.
the number "8".
Configuring Key ForceWare Graphics Driver Features
Chapter 7
142