Table of Contents
Advertisement
Chapter 7
Configuring Key ForceWare Graphics Driver Features
SLI Rendering Mode
Note: SLI rendering mode settings are available only if you are running in an SLI
multi‐GPU configuration and you have selected "global driver settings" from
the Active profile list.
• Select SLI multi‐GPU rendering to use SLI frame rendering for application
profiles that use SLI.
• Select Single GPU rendering if, for example, you prefer not to use multi‐GPU
rendering for a specific application. The NVIDIA driver selects the GPU to use for
single‐GPU rendering.
Note: This is not the same as completely disabling SLI. If you are trying to solve a
• Select SLI antialiasing to use quality modes beyond 16x antialiasing for
application profiles that use SLI.
About Using Other SLI-based Advanced Settings
For additional information on SLI and configuring advanced SLI settings, go to the
following Web address:
slizone_appprofile.html
Enable Stereo
Applies to graphics cards based on newer NVIDIA GPUs, such as the Quadro FX
series.
Tip: If the stereo or overlay features do not work properly, you may want to
try setting different screen resolutions and refresh rates until you arrive
at a setting or combination of settings for better results.
Select the Enable stereo in OpenGL check box to enable stereo functionality in
OpenGL applications. To run stereo applications with shutter glasses or other
hardware, the NVIDIA driver exports OpenGL stereo pixel formats and organizes
119
compatibility issue, you may want to completely disable SLI by clearing the
Enable SLI multi‐GPU check box on the SLI page.
http://www.slizone.com/page/
Quadro Workstation User's Guide
Advertisement
Table of Contents
Troubleshooting
