Safety Instructions - Neoware e140 - Thin Client User Manual

Safety Instructions

Please read these safety instructions carefully and keep this user's man-
ual for later reference.
1. Before removing the outer case from the appliance, always disconnect the AC
power cord to prevent the possibility of dangerous electrical shock.
2. Before cleaning, disconnect the appliance from AC power. Do not use liquid or
sprayed cleaning products on the unit. Instead, use a moistened sheet or cloth for
cleaning. Never pour any liquid into any appliance openings: This could cause fire
or electrical shock.
3. Be sure not to expose the appliance to excessive humidity. The appliance should be
stored and used only in temperature and humidity controlled environments. Stor-
ing appliances below -20°C (-4°F) or above 60°C (140°F) may cause damage.
4. Be sure to install the appliance on a secure surface. A falling appliance could cause
injury.
5. Place the power cord in such a way to avoid people stepping on it. Do not place
anything over the power cord.
6. Be sure to note all cautions and warnings on the appliance.
7. If the appliance is not used for a long period of time, disconnect the AC power to
avoid damage caused by voltage transients.
8. If one of the following situation occurs, be sure to get the appliance checked by a
qualified service technician:
The power cord or plug is damaged.
•
Liquid penetrates the appliance case.
•
The appliance is exposed to moisture.
•
The appliance does not work well or you cannot get it to work according to the user's
•
manual.
The appliance has been dropped or damaged.
•
The appliance has obvious signs of breakage.
•
Safety Instructions vii