Neoware e140 - Thin Client User Manual page 51

4
Select a modem from the drop down menu.
Note: If an internal modem is installed, it will be seen as "Com
3:".
5
After selecting your modem, click the Device Properties but-
ton.
In the Device Properties dialog, define the Port Settings and Call
Options in each tab according to the modem setup. To learn the
settings for your modem, read the mode manual. Once completed
setting up your modem configuration, click OK in the upper right
hand of the Device Properties dialog.
Note: When setting the baud rate for 56k modems, choose
"115200."
Creating a PPP/RAS dialup connection
Creating Connections
Select a modem
from the drop
down menu
Port Settings
Call Options
51