To change the default Telnet port number, 23, type another
•
16-bit port number.
To override the terminal name reported over Telnet, type a
•
name in the Telnet Name box.
To avoid generating a Telnet echo when the connection starts,
•
select Suppress Echo.
To select either the Telnet Binary or EOR options, select DO
•
in the Force Negotiation section.
NO, the default setting, won't force any negotiations. The
DONT setting conversely, forces a negotiation by telling the
host that the option isn't supported.
To send a timing mark (TM) or carriage return (CR) with a
•
Telnet break packet, select the appropriate break settings.
5
If you selected a modem connection for a dial-in serial port
connection, click Configure.
If this is a new configuration, type a configuration name.
•
Creating a Neoware TeemTalk Terminal Emulation Connection
Creating Connections
59