Setting User Information - Panasonic AG-HMC80PJ Operating Instructions Manual

5
Select ENTER and press the ENTER button
when all items have been set.
With this unit, the time code value is adjusted in
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording.
Recording format
1080/4P
70/4P

Setting user information

Setting user information allows you to store 8-digit
information in the hexadecimal format.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
2
Select the UB PRESET item in the setting
menu RECORD SETUP screen, and then
press the ENTER button.
• Menu operation (Page 40 of Vol.1)
• Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see "Description of parts (Remote
control)". (Page 3 of Vol.1)
3
Select YES and press the ENTER button.
Time code adjustment
Adjustable in 4-frame
increments
4
Using the cursor button, select the item you
want to set with the left or right button, and
set the numerical value with the up or down
button.
You can reset the user information to nothing by
pressing RESET button.
PHOTO MCR
AVCHD DV
AUDIO SELECT
CH1
COUNTER
AUTO
AUDIO SELECT
MANUAL
Camera
5
Select ENTER and press the ENTER button
when all items have been set.
AUDIO IN
CH1 CH2
AUTO FRONT
AUDIO LEVEL
CH2
MAN REAR
RESET/ TC SET
AUDIO IN
CH1 CH2
AUTO FRONT
MAN REAR
7