Initializing Scene Files; Loading The Metadata - Panasonic AG-HMC80PJ Operating Instructions Manual

Clip metadata
You can add the name of the videographer,
shooting location, text memos and other
information to the video data you have recorded on
the SD Memory Card. This data is called the clip
metadata.
Display clip metadata with the META DATA PROP
item (Page 105) in the setting menu RECORD
SETUP screen.
There are two kinds of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload file created on the SD
Memory Card which is loaded in the unit.
What the clip metadata consists of
You can set the items underlined below by loading
the metadata upload file on the SD Memory
Card. All other items are set automatically during
shooting.
*
CLIP NAME:
1
This indicates the LOAD DATA (loaded data),
COUNT (counter value), and REC DATA
(recorded data).
ACCESS:
This indicates the CREATOR (name of the
person recording) and LAST UPDATE PERSON
(the person who last updated the data).
SHOOT:
This indicates the SHOOTER (name of the
videographer) and the PLACE NAME (name of
location).
*
SCENARIO:
2
This indicates the PROGRAM NAME, SCENE
NO. and TAKE NO.
NEWS 1:
This indicates the REPORTER (name of the
reporter) and PURPOSE (purpose of data
collection).
NEWS 2:
This indicates the OBJECT (target of data
collection).
MEMO1:
This indicates the PERSON (name of the person
who recorded the text memo).
MEMO2:
This indicates the TEXT (contents of memo).
*
If there is no information in the metadata upload
1
file, consecutive five-digit numbers will be
applied to the clips in the order that they were
recorded, with the first clip to be recorded being
given the number 0. The USER CLIP NAME
recording method is selectable. Please refer to
the page 4.
*
When SCENARIO is to be input, you must input

the PROGRAM NAME. You cannot input the
SCENE NO. and TAKE NO. only.
• Only printable ASCII characters can be
displayed by this unit.
• Due to the limitations imposed by this unit
on the number of characters which can be
displayed, not all the data can be displayed.
(This does not mean that the data which is not
displayed has been deleted.) Use an AVCCAM
viewer or other program to check all the data.
• Metadata can be produced with AVCCAM
Viewer. (Page 1)

Loading the metadata

You can perform any of the following operations.
If necessary, make preparations prior to
undertaking the operations.
Loading the metadata
• Insert the SD Memory Card on which the
metadata is recorded into the unit.
Selecting whether to record the metadata on
the SD Memory Card
Initializing the metadata inside the unit
Displaying information on metadata inside the
unit
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
• The CAMERA lamp lights red.
2
Press the MENU button.
Menu operation (Page 40 of Vol.1)
3
Select the setting menu RECORD SETUP,
and press the ENTER button.
(Continued on the next page)
3