Panasonic AG-AC130A Operating Instructions Manual page 98

Cannot record even though
the memory card is inserted
correctly.
Recording stops by itself.
Editing
Cannot read the data on the
memory card.
Cannot perform non-linear
editing.
Cannot dub onto an
external device.
Displays
Something is wrong with
the time code display.
Playback
Cannot play back content
even when I press the play
button.
Mosaic-like noise appears
when fast-forwarding or
rewinding a clip.
Images do not appear on
the television even though I
have connected the camera-
recorder correctly.
Cannot hear any sound
from the camera's speaker.
98
• The write-protect switch on the memory card may be in the <LOCK>
position. The memory card cannot be recorded to if the switch is in
the <LOCK> position.
• The remaining memory on the memory card may be extremely low.
Save the content onto other media and delete unnecessary data
from the memory card, or use a new memory card instead.
• The memory card may have been correctly formatted. Alternatively,
the format itself may be incompatible with this camera. Reformat the
memory card using the camera.
• 8 MB to 16 MB memory cards cannot be used for shooting movies.
• The memory card may not be compatible with video recording.
Always use a memory card compatible with video recording.
• Make sure the memory card has been correctly formatted.
If not, format the memory card using the camera.
• Check the specifications of your computer and connection cable.
• Make sure the external device connected correctly.
• The time code display may not register a regular count if a clip is
played back in the reverse slow mode, but this is normal.
• Make sure the camera is in the <CAMERA> mode.
Turn the POWER/MODE switch and confirm that the PB lamp <PB>
is lit.
• Make sure that the playback format matches the data.
Match the playback format with the recording format of the clip.
• This noise is inherent to digital video technology. It does not indicate
a fault.
• Make sure that the input selector on your television is set to video
input.
Read the instructions of your television carefully and select the
correct video input connector for the camera.
• You may have turned down the camera's volume control too far.
Adjust the volume level by pressing the <AUDIO MON/ADV> button
<+>.
P15
P13
Page 11
of Vol.1
Page 11
of Vol.1
P13
P64
P64
—
P50
—
—
P62