Table of Contents
Advertisement
Navigating Through the Setup Utility
Use the keys listed in the legend bar on the bottom of the Setup screen to work your way through the various
menu and submenu screens of the Setup Utility. The table below lists these legend keys and their respective
functions.
Key
and
To move between selections on the menu bar.
To move the cursor to the field you want.The currently selected field will be highlighted.
and
The right side of each menu screen displays a field help panel—Item Specific Help panel.
This panel displays the help text for the currently selected field. It updates as you move
the cursor to each field.
You can also use these keys to navigate through the multipage General Help window.
F5 or (-)
To select a value for the currently selected field (only if it is user-configurable). Press F5
or (-) to select the next lower value; F6, (+), or Space to select the next higher value.
F6, (+), or
Space
A parameter that is enclosed in square brackets [ ] is user-configurable. Parameters are
not user-configurable for one of the following reasons:
Enter
To select a field value.
Esc or Alt-X
If you press this key:
F1 or Alt-H
To bring up the General Help window. This window lists other Setup navigation keys that
are not displayed on the legend bar.
F9
Press to load default system values.
F10
Press to save changes and close the Setup Utility.
Additional help information is available on the General Help window. Just press F1 on any screen.
Chapter 1
The field value is auto-configured or auto-detected.·
The field value is informational only.
The field is password-protected.
On one of the menu screens, the Exit menu displays.
On a General Help window, closes the window.
Function
13
Advertisement
Table of Contents
