Aastra 480i Administrator's Manual page 39

Broadsoft sip ip phone release 1.0

Hide thumbs Also See for 480i:

Table of Contents

#----------------------------------------------------------------------

Softkey Settings

================

# Softkeys can be set either server wide or unique to each phone.

# Setting softkeys as line/call appearances should be done in the

# "<mac>.cfg" Þle, since these are unique to each phone.

# Notes: There are a maximum of 18 softkeys that can be conÞgured

# on the 480i phone. These can be set up through either of the 2

# conÞguration Þles, depending on whether this is to be server

# wide ("aastra.cfg") or phone speciÞc ("[mac].cfg").

# Each softkey needs to be numbered from 1 - 18, for example

# "softkey12 type: speeddial". Softkeys can be set up as speeddials

# or as additional call/line appearances and have a type, label

# and value associated with it as seen here in the default softkey

# settings.

# SOFTKEY TYPES: "line", "speeddial"

# SOFTKEY LABEL: Alpha numeric name for the softkey. The maximum

# SOFTKEY V ALUE: If softkey type is a speeddial, any DTMFs (from

# Softkey Speed Dials

# ===================

For the default softkey speed dials, please refer to the sample

"aastra.cfg" Þle.

Continued...

number of characters for this value is 10 for

speeddials and 9 for lines.

0 - 9, *, "#") or a comma (,) for 500ms pause and

'E' for On-hook can be set for the value. If

softkey type is line, enter value as a number from

5 up to 9 (1 - 4 are already hardcoded as the L1,

L2, L3 and L4 hard key line/call appearances)

Model 480i Broadsoft Admin Guide 36

Table of Contents