Aastra 480i Administrator's Manual page 32

# Notes: There are a maximum of 18 softkeys that can be conÞgured
# on the 480i phone. These can be set up through either of the 2
# conÞguration Þles, depending on whether this is to be server
# wide ("aastra.cfg") or phone speciÞc ("[mac].cfg").
# Each softkey needs to be numbered from 1 - 18, for example
# "softkey12 type: speeddial". Softkeys can be set up as speeddials
# or as additional call/line appearances and have a type, label
# and value associated with it as seen here in the default softkey
# settings.
# SOFTKEY TYPES:
# SOFTKEY LABEL:
#
#
# SOFTKEY V ALUE:
#
#
#
#
#
# Default Softkey Speed Dials
# ===========================
softkey1 type: speeddial
softkey1 label: "Unpark"
softkey1 value: *88
softkey2 type: speeddial
softkey2 label: "CallReturn"
softkey2 value: *69
softkey3 type: speeddial
softkey3 label: "Speed Dial"
softkey3 value: *74
softkey4 type: speeddial
softkey4 label: "Portal"
softkey4 value: 2"#"
Continued...
29 Model 480i Broadsoft Admin Guide
"line", "speeddial"
Alpha numeric name for the softkey. The maximum
number of characters for this value is 10 for
speeddials and 9 for lines.
If softkey type is a speeddial, any DTMFs (from
0 - 9, *, "#") or a comma (,) for 500ms pause and
'E' for On-hook can be set for the value. If
softkey type is line, enter value as a number from
5 up to 9 (1 - 4 are already hardcoded as the L1,
L2, L3 and L4 hard key line/call appearances)