Installing A Main Cooling Module; Replacing The I/O Cooling Module; Figure 24. Installing A Main Cooling Module - Intel MFSYS25V2 Service Manual

Installing a Main Cooling Module

To install a main cooling module, follow these steps:
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Locate the cooling module bay and remove the cooling module to be replaced.
3. Slide the replacement cooling module into the unoccupied cooling module bay until
the retention latch engages (see

Replacing the I/O Cooling Module

The Intel
module pre-installed at the front of the chassis. For the exact location of the I/O Cooling
Module in
®
Intel Modular Server System Service Guide

Figure 24. Installing a Main Cooling Module

®
Modular Server System MFSYS25/MFSYS35 ships with one I/O cooling
Figure 24).
AF002439
37