Setting The Area Code; Registration; Resetting All Settings - Motorola L802 User Manual

3.17

Setting the area code

1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE
.
3. Press MENU and then enter the area code.
4. Press MENU to save.
3.18

Registration

Up to 5 handsets can be registered to one base. The original
handset is pre-registered to use.
Additional handsets must be registered to the base before
you can use them.
To register an additional handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION
.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
YES NO
or .
Using the Phone
YES
4. Select then press MENU to enter the registration
procedure as follows:
1. Press and hold FIND for around 4 seconds on the base,
release once IN USE LED is flashing.
2. Place the unregistered cordless handset on the base
or charger.
3. A confirmation tone is generated if registration is
HANDSET X
successful.
number of handsets, and then the phone returns to idle.
To register an originally unregistered handset, follow steps 1
through 3 above.
3.19

Resetting all settings

1. Press MENU and then VOL+ or REDIAL/VOL- to select
RESET SETTINGS
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ALL SETTINGS
.
3. Press MENU and to select
will reset to default.
NOTE
All of your phonebook entries, calls list, and redial list, will
remained unchanged.
X
is displayed where denotes the
YES
. All personalized settings
21