Resetting The System; Pairing The Remote With The Console; Performing A System Software Update; Contacting Customer Service - Bose Lifestyle T10 Operating Manual

TAB 8 TAB 7
C M
ARE AND AINTENANCE

Resetting the system

1. Press and hold the power button on the control
console for 5 seconds or until the power light on
the control console changes to red.
The power light on the control console changes to
red when the system shuts down.
2. Press and release the power button on the control
console to restart the system. The power light
changes to blinking green and then solid green
when the system is on and ready to use.
3. If you still cannot operate the system using the
remote, try the next procedure to pair the remote
with the control console.

Pairing the remote with the console

1. Make sure your system is on. If not, press the
power button on the control console.
2. Hold the remote close to the control console.
3. Press and hold both the Mute button (
control console and the OK button on the remote at
the same time for five seconds. The power light
blinks when pairing is complete.
4. Press any remote button and verify that the power
light on the control console blinks with each button
press.
24
TAB 6 TAB 5
) on the
TAB 4 TAB 3

Performing a system software update

System software updates are available periodically and
can be downloaded over the Internet to the USB drive
included with your system.
1. Press the Setup button on the front of the control
console to display the Setup menu.
2. Using the remote navigation buttons, select
Update.
3. Follow the instructions on the screen.
Note: To make sure your Bose
the remote near the front of the control console while it is
being updated.

Contacting customer service

For additional help in solving problems, contact Bose
Customer Service. See the address sheet included in
the carton.
TAB 2 English
® remote is updated, hold
®