Troubleshooting - Bose Lifestyle T10 Operating Manual

Home entertainment systems; home theater systems
Hide thumbs Also See for Lifestyle T10:
Table of Contents

Advertisement

Available languages

Available languages

English
TAB 2

Troubleshooting

Problem
The system is not responding
to initial operation of my
Bose
®
remote
The Bose remote does not
control a device I added
during the initial setup
One video connection is less
than optimum
System doesn't do
anything
No sound
TAB 3
TAB 4
• Make sure the control console is turned on.
• Make sure batteries are in the remote.
• Reset the system. See "Resetting the system" on page 24.
• Press any remote key and watch the power light on the control console. It should blink with each press.
If not, see "Pairing the remote with the console" on page 24 and follow the procedure.
• Try setting up the device again. Press the Setup button on the control console. Select the device options
and follow the on-screen instructions to set up the device again.
• Your system may need a software update. See "Performing a system software update" on page 24.
• To change a video connection, press the Setup button on the control console and select the device setup
options. Follow the on-screen instructions.
• Make sure the AC power cord is inserted securely into the power supply.
• Make sure the Acoustimass
®
• Select a connected device from the SOURCE menu.
• Reset the system. See "Resetting the system" on page 24.
• Make sure the Acoustimass module is plugged into a live AC (mains) outlet.
• Increase the volume.
• Press the Mute button (
) and make sure your system is not muted.
• Check the input connections on the control console. Make sure that you have selected the right source.
• Make sure that the audio input cable is firmly plugged into the Acoustimass connector on the control
console and the other end is firmly seated into the Media Center connector on the Acoustimass module.
• Check connections between the front and rear speakers and the Acoustimass module.
• For radio operation (V25 and V35 systems only), connect the FM and AM antennas.
• Reset the system. See "Resetting the system" on page 24.
TAB 5
TAB 6
What to do
module and the power supply are fully plugged into a live AC (mains) outlet.
TAB 7
TAB 8
C
M
ARE AND
AINTENANCE
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents