Technical Specification; Installation; Unpacking; Removing The Transport Supports - Electrolux EU8216C Instruction Booklet

Technical specification

Model
Gross volume
Width
Height
Depth
Energy consumption
Energy class
Rated power
Freezing capacity

Installation

Unpacking

Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling.

Removing the transport supports

Remove the transport supports placed
along the door sides
inside the hinges

Cleaning

Wash the inside of the cabinet using lukewarm water
and bicarbonate of soda (5 ml to 0,5 litre of water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.

Installing the cabinet

To obtain the best performance from the cabinet,
ensure :
·
the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.
·
the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.
·
the room in which the cabinet is placed
has a temperature of +16C to +32C.
·
the cabinet is level. The cabinet should not lean
against any wall. If necessary adjust the
feet using the adjustment spanner supplied.
·
there is good air circulation around the cabinet
and that the air channels below and behind
the cabinet are not blocked. The ventilation
space above the cabinet must be at least 200 cm2.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard. In this case,
the space behind the cupboard must be at least
50 mm deep.
EU8216C
286 l
595 mm
1800 mm
600 mm
496 kWh/Year
C
120 W
28 kg/24 hours
13
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
b)
a)
Electrolux 8181499--02/4
GB
GB
50mm