Resetting To The Factory Settings; Deleting (Resetting) The Connection Information - JVC GV-LS2W User Manual

Resetting to the factory settings

Reset all the unit settings to factory default.
1 Select "COMMON SETTINGS" in "MANAGE".
If the sub settings are not displayed, click "+" on the
left of "MANAGE".
2 Click the "EXEC" button on the right of
"FACTORY PRESET".
3 To execute, click the "EXEC" button.
56
Deleting (Resetting) the connection
information
Delete the connection information stored in the unit.
Press and hold the reset button of the camera for
three seconds with the AC adapter connected.
The shooting, WPS, and power buttons blink while the
camera is reset. Wait until it stops blinking and stays lit.