Adding A Camera Driver's User - JVC GV-LS2W User Manual

Adding a camera driver's user

To access to the unit using the camera driver ( ➭ page
39), you need to set the user name and password
beforehand. (Up to four users can be registered.)
Initial setting: USERNAME "root", PASSWORD
"password".
They should be changed as soon as possible for
security reasons.
* Multiple users cannot view simultaneously.
1 Select "MONITORING SETTINGS" in
"NETWORK".
If the sub settings are not displayed, click "+" on the
left of "NETWORK".
2 Click the "ADD" button.
• Select a user from "USER (JVC CAM driver)" and
click the "UPDATE" button to change the user
name and password of the user.
• Select a user from "USER (JVC CAM driver)" and
click the "DELETE" button to delete the user.
3 Enter "USERNAME", "PASSWORD", and
"PASSWORD (CONFIRM)".
Enter 1 to 32 characters for the user name, and 8 to
32 characters for the password. (1 byte alphanumeric
characters and symbols only)
4 Click the "SAVE" button.
The user has been registered.
19